B52 Matrix 1000 Speaker Set enlarge

  Reg
Price		 Sales
Price		  
The MATRIX 1000 system is a complete sound reinforcement solution consisting of two 10î two-way speakers and an active 15î subwoofer. The subwoofer enclosure is equipped with a three channel amplifier and all the electronics required to run the system. The electronic circuitry was fine tuned to match the two-way speakers for the best possible sound. This system was designed for easy operation since you do not need to worry about tweaking frequencies and finessing levels. All you have to do is set up the system components, connect the XLR right and left signal cables, speaker cables and power cords and youíre ready to go!

SUGGESTED APPLICATIONS:
* Mobile DJ
* Karaoke
* Nightclub, Restaurant, Bar Install
* Corporate Audio / Video
* Home Entertainment System
* Live Sound System
* Stage Monitoring System
* Booth Monitoring System
* Drum Monitoring

BUILT-IN 3-CHANNEL AMPLIFIER
The 15î subwoofer enclosure is divided into two separate compartments. The front chamber serves as the cabinet for the 15î subwoofer. The rear chamber houses all of the systemís electronic circuitry, which includes the amplification for all three components, power supply and preamps. The 15î subwoofer has a power handling capability of 400 watts and a nominal impedance of 8 ohms.

10" TWO-WAY SPEAKERS
The two 10î two-way speakers are loaded with B-52ís custom 10î speakers and a 3/4î titanium diaphragm compression driver, mounted to a 900 x 400 constant directivity horn. The speakers are designed to be pole mounted, can sit as stage monitors and have built-in (3/8î ­ 16 TPI) flying hardware for permanent installations. The front panel of both two-way speakers is concaved so as to fit perfectly onto the subwoofers front grille for easy transport. Each two-way speaker has the power handling capability of 150 watts and a nominal impedance of 4 ohms.

TRANSPORTING THE SYSTEM
To transport the system, simply set the subwoofer on its casters and place the two 10î two-way speakers onto the subwooferís front panel facing down. Secure them with the included locking strap by fastening it to the bar handles on the side on the subwoofer cabinet. Place the included cover over the entire system and you are ready to move the system with ease.

SPECIFICATIONS:

700-WATT 3-CHANNEL AMPLIFIER
Subwoofer Power Output: 400 W / 8 Ohms
10” Two-way Power Output: 150 W / 4 Ohms
Line in: XLR Female
Parallel out: XLR Male
Input Impedance: 48 k Ohms
Speaker Out: Speakon NL4 Style Connector
Power Requirement: 115V<>50/60Hz<>10A - 230V<>50/60Hz<>6A

15" SUBWOOFER
Speaker: 1 x 15î Custom Built B-52 Subwoofer
Nominal Impedance: 8 Ohms
Subwoofer Freq. Response: 102 dB (half space)
Sound Pressure Level (1w/1m): 127 dB @1% THD
Max. SPL:
Weight: 115 lbs
Dimensions (Transport): 28î (H) x 19î (W) x 23î (D)

10' TWO-WAY SPEAKERS
Speaker Input: Speakon style connector (pin 1+ = +, pin 1- = -)
LF/MF Woofer: 1 x 10” Custom Built B-52 Transducer
HF Driver: 1 x 3/4” Titanium Diaphragm on CD Horn
HF Dispersion: 90 x 40
Nominal Impedance: 4 Ohms
Active Freq. Response: 2.5 kHz; 12 dB / Octave
Crossover Frequency (passive): 101 dB (half space)
Sound Pressure Level (1w/1m): 124 dB @10% THD
Weight: 25 lbs
Dimensions (Upright): 19” (H) x 12” (W) x 11” (D)

COMPLETE SYSTEM
Weight: 165 lbs
Dimensions (Transport): 39î (H) x 19î (W) x 23î (D)